Flying-Hobby
MOTOR PINION GEAR 16T
| Modulus | 0.6 |
| Shaft Diameter | Φ6mm |
| Weight | 4.1g/pc |
Instruction:, Use for 650L brushless motor., Specification:, Motor pinion gear 16T x 1,
Flying-Hobby
MOTOR PINION GEAR 15T
| Modulus | 0.7 |
| Shaft Diameter | Φ6mm |
| Weight | 4.3g/pc |
Instruction:, Use for 650L brushless motor., Specification:, Motor pinion gear 15T x 2,
Flying-Hobby
MOTOR PINION GEAR 14T
| Modulus | 0.7 |
| Shaft Diameter | Φ6mm |
| Weight | 3.9g/pc |
Instruction:, Use for 650L brushless motor., Specification:, Motor pinion gear 14T x 2,
Flying-Hobby
700MX MOTOR SHAFT
Instruction:, ●Apply for RCM-BL700MX Motor, Specification:, ●700MX Motor Shaft x 1(6x8x93mm),
●Bearings MR688ZZ x 2Flying-Hobby
600MX MOTOR SHAFT
Instruction:, ●Apply for RCM-BL600MX Motor, Specification:, ●600MX Motor Shaft x 1(4.8x6x80.7mm),
●Bearings MR686ZZ x 2Flying-Hobby
T-MOTOR MULTI FLYER ESC 40A
| Output | Continuous 40A, Burst 60A up to 10 Secs. |
| Input Voltage | 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery. |
| BEC | 3A / 5V (Switch mode). |
| Max Speed | 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM |
| Size | 55mm (L) * 28mm (W) * 12mm (H). |
| Weight | 35g. |
| 2.Multiple protection features | Low-voltage cut-off protection / over-heat protection / throttle signal loss protection. |
| 3.3 start modes | Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters. |
Features:, 1.Extreme low output resistance, super current endurance.,
ESC40A 4.Throttle range can be configured and is fully compatible ...Flying-Hobby
600MX MOTOR SHAFT
Instruction:, ●Apply for RCM-BL600MX Motor, Specification:, ●600MX Motor Shaft x 1(5.5x6x93.9mm),
●Bearings MR686ZZ x 2Flying-Hobby
ALUMINUM MOTOR PULLEY Z20 - GOBLIN 500
Includes:, - Aluminum Motor Pulley Z20 x 1pc, Use for:, - Goblin 500,
- DIN 12.9 Cone Point Set Screws M4x4 x 2pcs ...Flying-Hobby
ALUMINUM MOTOR PULLEY Z21 - GOBLIN 500
Includes:, - Aluminum Motor Pulley Z21 x 1pc, Use for:, - Goblin 500,
- DIN 12.9 Cone Point Set Screws M4x4 x 2pcs ...Flying-Hobby
ALUMINUM MOTOR PULLEY Z19 - GOBLIN 500
Includes:, - Aluminum Motor Pulley Z19 x 1pc, Use for:, - Goblin 500,
- DIN 12.9 Cone Point Set Screws M4x4 x 2pcs ...Flying-Hobby
ALWARE SPIDER 500 MOTOR MOUNT
Features:, - Used for ALware Quad Flyer Spider 500, Included:, 4x Spider 500 Motor Mounts,
- Made of Glass Fiber Sheet - CNC ManufactureFlying-Hobby
TAIL MOTOR HOLDER
Detail :, Walkera Dragonfly Spare Parts HM-CB180-Z-19 Tail Motor Holder,
Flying-Hobby
TITAN E325SE + ESC + MOTOR
| Full Length of fuselage | 25.75" |
| Full width of fuselage | 4.72" |
| Total height | 8.3" |
| Main rotor dia | 28.54" |
| Tail rotor dia | 6.14" |
| Full equipped weight | 30.60 oz. |
| Motor | No.2382 OBL 29-37-10H |
| ESC | No.8041-H BLC-40 |
| Blades | Wood Blades |
Specification:, , Gear ratio: 1 : 11.5 : 4.4, Features:, , Content:, Accessories Needed:,
The Titan E325 SE is a mini RC Helicopter of ...Flying-Hobby
MOTOR (COUNTER-CLOCKWISE) FOR WALKERA QR LADYBIRD
,
Motor (Counter-Clockwise) for Walkera QR Ladybird